As summer arrives, the prospect of purchasing air conditioning becomes more important. Today’s most common confusion in the market is deciding between choosing a normal AC inverter or non-inverter AC. So this blog will give you a quick insight into the inverter AC and the non-inverter AC.
What is an Inverter Air Conditioner?
Inverter technology works like an accelerator in an automobile. When a compressor needs more energy, it gives it more power. When it needs less energy, it gives less power. Owing to this inverter AC technology, the compressor always remains on but consumes more or less power depending on the supply air temperature. The power and speed of the compressor are appropriately selected.
What is a Non-Inverter Air Conditioner?
Non-inverter air conditioners have a fixed-speed compressor motor. The compressor will cycle on and off automatically instead of running at full speed. The compressor automatically shuts off when the desired temperature is reached and restarts when the temperature increases. Compressors always work at high power and are noisy when running, thus consuming more electricity.
The main difference between the two types of air conditioners is the ability of the compressor to adjust the motor speed to match the room temperature. Once the room is cooled down, an inverter air conditioner lowers the speed to save the energy and refrigerant needed to cool the air.
By comparison, motors without an inverter only run at the highest speed and then shut off when the room temperature matches the desired temperature. This repetitive switching on and off process generates more noise and uses more energy.
The difference between the two Air Conditioners based on certain factors are as follows:-
-
Technology
An inverter is usually a device used to change the type of electricity from AC to DC or vice versa. An inverter is used to control the power supply frequency to the compressor motor in an air conditioner. Inverter air conditioners contain a variable speed compressor that controls the temperature to provide the right amount of cooling and heating. In contrast, non-inverter air conditioners have a fixed-speed compressor that operates all-or-nothing.
-
Speed
Inverter air conditioners have variable speed compressors that can be controlled to adjust the air conditioner’s temperature as needed. On the other hand, a fixed-speed air conditioner has a compressor that starts and stops periodically, which can be turned on and off to produce the desired cooling effect. It cannot regulate the compressor’s speed, consuming more energy during operation.
-
Noise
With inverter air conditioners, the compressor in the unit does not switch on and off as often as non-inverter air conditioners and always works at a moderate temperature, running more quietly. A non-inverter air conditioner is less efficient when running because it automatically turns on and off and makes more noise than an inverter air conditioner. Due to its operation, it does its job a little harder and makes more noise.
-
Efficiency
Inverter technology works like an accelerator in an automobile. When a compressor needs more energy, it gives it more power. When it needs less energy, it gives less power. Thanks to this technology, the compressor is always on but consumes more or less power depending on the supply air temperature.
-
Cost
Quieter, smoother operation and energy-efficient technologies will only increase the cost of inverter air conditioners. Inverter air conditioners are more expensive than non-inverter air conditioners, but definitely save you more money in the long run.
Considering all the above factors, it is recommended that you choose an air conditioner that suits your needs. The technology has become so vast that you can even purchase a 1.5-ton Inverter Air conditioner online. Depending on how often you use your AC and what settings or temperature levels you use, you can decide on your air conditioner choice.
